Categories
Pixvana

Obituary: Luis Emilio Casanueva Tagle

Our papa Emilio Casanueva passed away Friday May 25th, 2018, at the Cottage Hospital in Santa Barbara CA.  He was surrounded with love and affection with family.  Emilio was born in Chile in 1939 and immigrated to the USA with his young family and eventually settled on the west coast in Marin County CA.  Early in his career he opened Campolindo, an innovative health-food store in San Anselmo in the 1970s, and he maintained a life-long interest in health foods and active living.  He was the founder of La Barraca de Zapallar and Zapallar Sustentable, and a designer/builder of dozens of delightful homes in Chile, the San Francisco Bay Area, and Santa Barbara.  One of Emilio’s greatest passions in life was ocean swimming.  He was a founder of swimming clubs and events including the Santa Barbara Channel Swimming Org, and social swimming groups Patos del Mar / Ocean Ducks.  He published a book on innovative cooking recipes using Cochayullo.

Emilio was a loving and active father to his 5 sons: Luis Andres, Santiago, Forest, Joaquin, and Roberto.  He was an adoring and fun-loving father-in-law to Laura and Cristina.  He was a cool and relaxed grandpa to Emilio Jr (and wife Andrea), William, Camila, Carlos, Caetano, and Ava.  He had the joy of meeting his first great-granddaughter Nyla this year.  His dearest friend and big-brother Catucho survives him, together with his wife Angelica and their many children and grand-children, who knew Emilio intimately and delighted in his company.  His nephews Carlos and Diego Casanueva were very dear to his heart, as were Andrea, Angelica, Mario, Cote, Maria, and their partners “Gordo”, “Caco”, Luz Maria, and “Negro”.  Emilio’s former wives and co-parents remember him fondly and with great love and affection: Maria and Jane.  In Emilio’s last years of life, he had the incredible fortune of returning to Zapallar where he lived some of his most joyous moments together with Francisca who he absolutely adored.

He was beloved and he loved his many friends in the communities in which he lived.  He was particularly fond of his life-long friends in Chile and in the USA that shared his passions for swimming, good company, and positive outlooks.

Our family is planning a memorial for Emilio in Zapallar to be held at a later date.  His in memorium facebook page is a place to post photos and memories of him.

tata 2

Categories
Rants & Raves

Remove and Replace Ford Focus RS mk3 Billet Badges/Emblems

My 2017 Ford Focus RS (mk3) is a joy to drive and i like its styling.  I’m a first time Ford owner, and got in on the “made in USA” car thing just in time for Ford to discontinue all future sales of car vehicles (except for Mustang) which might work out just fine for me, as I think of this project car as a long-term toy to use for track and occasional car outings.  Now it will also be the last ford hot-hatch made for a long time?!  Bonus.

car

When i looked over the exterior stylings of the car one of the things that stood out for me as a eyesore is the blue on white stock “billet badges”, the thing on the hood and the trunk that say “Ford” in the classic font.  I found a custom fabricator and design shop called Billet Badges that had awesome designs, and when i contacted them they assured me that as long as I was patient and gave them time (turned out to be about 4 months) to design and spec the new billets, they’d be happy to do a custom design.  I went with “Fury” in the same Ford font, which feels playful and true to the original mark, but unique and a tribute to the awesome heroine Furiosa from the last Mad Max Fury Road film.

The badges came a few weeks ago and I got started on install over the last day and wanted to post my findings/process for others thinking of this kind of mod.

badges

Here’s the first headline:  Be warned, the Ford Focus RS mk3 (2016-2018) front billet badge (“ford emblem” on hood) does indeed have screws that need to be removed from inside the engine bay. Floss and a heat gun alone will get you nowhere!  I was unable to find any videos or posts that correctly showed this install challenge. Floss alone will rip and hurt your hands–this job requires unfastening two screw bolts from under the front bumber/face of the hood.

Let’s jump right to the problem piece.  Using a heat gun (to warm up the pieces and make the glue that binds them to the surface a little looser/easier to manipulate) is a great first step and I’ve used to remove several outer badges on this and other cars.  Then, using tooth-floss, you can shimmy the floss between the surface and the badge, with a back-and-forth motion gently bitting into the adhesive and releasing the bond, eventually leading to the piece/badge popping right off.

But not with the front badge, which looks like this:

You can see the removed emblem and the fasteners. Note the thick plastic screws that are fused to the emblem and are threaded.  Those little fasteners are threaded onto the end of the two outer plastic aligners.  DO NOT try to rip/pull this off, you’ll damage the body fender/bumper.  Instead, go in through the engine compartment, get behind the badge, and use some pliers to twist/turn the fasteners off.  Then the piece will come off with some gentle tugging and the floss/cutting of the glue-binding.  When off, you’ll see this:

There is lots of adhesive to break down.  A little elbow grease, some Goo Remover fluid, and some gentle scrubbing and fingernail work, and voila:

I then placed the new billet badge in the slot to see if the fit was right, and was amazed at *perfect* fit.  Flush to the hood, perfect depth, oval size, etc.

Now onto the back tailgate.  Turns out the badge in the back is NOT fastened, rather, is simply pushed in through some alignment holes.  here’s what the piece looks like removed, with some floss to loosen the grip, and some gentle tugging.

IMG_0853

And the tailgate hole after some cleanup:

IMG_0857

I did have a fit problem with the back, you can see here that i could fit a US 1 cent penny in the gaps that remained around the badge, to be flush with the body of the tailgate:

IMG_0861

Here’s the same view, from flush above, without the penny in place:

IMG_0862

I contacted the friendly folks at Billet Badges and they said to send back and they would grind down the width of a penny, i think we agreed on a few mms.  When it came back a week later, perfect:

IMG_0860

So in summary, here below are (left) the FRONT badge, which has screw fasteners and needs to be loosened from inside the engine bay, the (right) rear badge, which has alignment push-in plastic protrusions (can simply be pulled off after loosening the glue bond), and the back of my new badges which are smooth, with the Made in the USA sticker (thanks again BilletBadges.com!)

IMG_0856

And here is the front after it is fully installed:

IMG_0958

And a wider shot, with my now more recently added decal stripes:

IMG_1808
e, voila!